Span Wire | Traffic Signal Hardware

Catalog Items: Span Wire Mountings

All colors available.

Materials: aluminum, bronze, iron, galvanized iron

0103

TSH 0103

Center Hub 3 Way

1-1/2" Center top port, with surlock and 2 set screw holes
(3) 1-1/2" threaded ports 120 degrees
4-1/2" diameter bottom opening
2 Mounting holes for cover plate TSH 0105 to close bottom opening

0104

TSH 0104

Center Hub 4 Way

1-1/2" Center top port, with surlock and 2 set screw holes
(4) 1-1/2" threaded ports 90 degrees
4-1/2" diameter bottom opening
2 Mounting holes for cover plate TSH 0105 to close bottom opening

0105

TSH 0105

Cover Plate for Center Hub

Coordinates with TSH 0103, TSH 0104

0115

TSH 0115

2 Way Cluster Bracket

(2) 1-1/2" threaded holes on bottom with surlock
Surlock on top hole
Coordinates with cover plate TSH 0115C
17" center to center

0115C

TSH 0115C

Bracket Cover Plate

Coordinates with TSH 0115, 0115T
Design allows for easy access to work on interior without having to entirely remove the cover. Just loosen the screws and it will rotate out of the way.

0115 T

TSH 0115T

2 Way Cluster Bracket with Tri-studs

(2) 1-1/2" threaded holes on bottom with surlock
Surlock on top
Coordinates with cover plate TSH 0115C
17" center to center
Tri-studs are 5/16"-NC x 1-5/8"

0123

TSH 0123

Clevis Hanger

Clearance for 5/8" clevis pins
Allows for flexibility in your span wire assemblies during storms and windy conditions.

0128

TSH 0128

Insulator bushing TSH 0128

Threads into wire entrance heads

Press-in Insulator bushing TSH 0128P

Snaps into wire entrance heads

0138

TSH 0138

Single Eye Balancer

1-1/2" threaded outlet (standard is NPT, can be ordered NPS)
1 set screw hole
Clearance for 5/8" clevis pin

0139

TSH 0139

Disconnect Hanger Clevis

1-1/2" NPS external threads

0158

TSH 0158

Wire Entrance Hanger

1 set screw hole
Designed to mount with span wire hanger TSH L149 or S149
Threaded 1-1/2" hole on bottom
Threaded 1-1/4" wire entrance to accept TSH 0128 insulator bushing

0190

TSH 0190

Wire Entrance Hanger

2 holes for 1/8" cotter pin
Designed to mount with span wire hanger TSH L149 or S149
Male threaded 1-1/2"NPS x 3" accepts TSH 0555 and 0556
Threaded 1-1/4" wire entrance to accept TSH 0128 insulator bushing

SP50

TSH SP50

Adjustable Hanger Bottom

Tri-studs are 5/16"-NC x 1-5/8" with surlock
Coordinates with SP54 extension bar, SP51 hanger top
Clearance holes for 3/8" bolt

SP51

TSH SP51

Adjustable Hanger Top

Coordinates with SP54 extension bar, SP50 hanger bottom
Clearance holes for 3/8" bolts
Clearance for 5/8" clevis pin on top

SP52

TSH SP52

Adjustable Hanger Block

Clearance holes for 3/8" bolt

SP53

TSH SP53

span wire adjustable hanger block slotted span wire

Adjustable Hanger Block with slot

Clearance holes for 3/8" bolt

SP54

TSH SP54

Extension Bar

Clearnance holes for 3/8" bolt

Standard lengths:

All other sizes available upon request.